# Submitting your build!

Finished building your project? Awesome! Here's everything you need to do:

---

### 1. Update your GitHub repo

Once you've built your project, make sure your GitHub repository is up to date! You should add in the following:

- Any files you've updated since (3D printed parts, schematics, firmware, etc.)
- A picture of your project in the README.md

### 2. Record a video demo!

Next, record a quick 1-minute video of what your project is, what it does, and how it works! It doesn't need to be super edited or professional - a recording from your phone works fine.

Post it on YouTube afterwards - it can be unlisted if you'd like.

### 3. Share your project online

Share your project online! Reddit is _heavily_ preferred, but Printables is also fine if your project has 3D printed parts with it too.

An example post is [@Cyao's Icepi Zero](https://www.reddit.com/r/embedded/comments/1kwx5p7/i_built_the_fpga_raspberry_pi_zero_equivalent/) - he's a 17-year-old Hack Clubber from France!

We would also REALLY appreciate it if you could plug Hack Club!!! No pressure though - just helps to spread the word :)

### 4. Submit!

Once you've done all of that, submit your project as a build! (WIP, ask in [#fabricate](https://hackclub.enterprise.slack.com/archives/C0ATWSPM22J) if you want to submit a build.)

Path rewards fulfillment is a WIP!

---

That should be it! Please ask in [#fabricate](https://hackclub.enterprise.slack.com/archives/C0ATWSPM22J) if you have any questions!